813 South Frazier
Conroe, Texas 77301
(936) 756-3389
800-464-1005

Home

About
Automatic LP Gas


Our Services

Online Bill Pay

Contact Us

Propane in the Home

Landscaping Your Tank

Propane Safety Tips

Rebates

Environmental Benefits

Commercial/Other

Other Propane Resources
 


  
 

SAMPLE DAILY CHECKLISTS FOR POWERED INDUSTRIAL TRUCKS

The following checklists are intended to assist in providing training on OSHA's revised powered industrial truck operator standards. They are not a substitute for any of the provisions of the Occupational Safety and Health Act of 1970, or for any standards issued by the U.S. Department of Labor's Occupational Safety and Health Administration (OSHA). OSHA wishes to acknowledge the UAW-Ford National Joint Committee on Health and Safety for granting permission to use the checklists and related graphics.


DAILY INSPECTION CHECKLIST
Propane Forklift Truck

KEY OFF Procedures

  • The vehicle inspection
    • Overhead guard
    • Hydraulic cylinders
    • Mast assembly
    • Lift chains and rollers
    • Forks
    • Tires
    • LPG tank and locator pin
    • LPG tank hose
    • Gas gauge
  • Check the engine oil level
  • Examine the battery
  • Check the hydraulic fluid level
  • Check the engine coolant level

KEY ON Procedures

  • Test the front, tail, and brake lights

ENGINE RUNNING Procedures

  • Check the gauges
    • Oil pressure indicator lamp
    • Ammeter indicator lamp
    • Hour meter
    • Water temperature gauge
  • Test the standard equipment
    • Steering
    • Brakes
    • Horn
    • Safety seat (if equipped)
  • Check the operation of load-handling attachments
  • Check the transmission fluid level

DAILY INSPECTION CHECKLIST
Yard Forklift Truck

KEY OFF Procedures

  • The vehicle inspection
    • Overhead guard
    • Hydraulic cylinders
    • Mast assembly
    • Lift chains and rollers
    • Forks
    • Tires
    • LPG tank and locator pin
    • LPG tank hose
    • Gas gauge
  • Check the engine oil level
  • Examine the battery
  • Inspect the hydraulic fluid level
  • Check the engine coolant level

KEY ON Procedures

  • Test the standard equipment
    • Front, tail, and brake lights
    • Fuel gauge (if diesel)
    • Windshield wiper
    • Heater

ENGINE RUNNING Procedures

  • Check the gauges
    • Oil pressure indicator lamp
    • Ammeter indicator lamp
    • Ammeter
    • Hour Meter
    • Water Temperature Gauge
  • Test the standard equipment
    • Steering
    • Brakes
    • Horn
    • Safety seat (if equipped)
  • Check the operation of load-handling attachments
  • Check the transmission fluid level

Source: http://www.osha-slc.gov/Training/PIT/pit_checklist.html

Back to Commercial Uses


 

  Copyright ©2005-2009 Automatic LP Gas Co.
  Last updated Thursday, March 19, 2009

  Powered by PROMIT